• Easy Installation: Convert your old DS Lite into a Game Boy Macro effortlessly with this simple PCB mod. No more struggling with complex installations! • Flex Amp & Macro Mod: Enjoy a hassle - free mod for your DS Lite motherboard. It features a 330 ohm resistor mod for single - screen operation. • Speaker Compatibility: Choose between mono or stereo speaker setups. Works great with various speakers, especially the recommended Switch speaker. This mod allows you to turn your DS Lite into a Game Boy Macro. Just remove the top screen, and this thin PCB enables the bottom screen. It has seven to nine solder points (depending on stereo speaker installation) and lets the DS Lite run from the lower screen only. The mod provides options for single - speaker mono or two - speaker stereo, with large solder pads for easy speaker wire attachment. You'll need flux and a finer tip soldering iron (not included). Add a bit of solder to mounting points for easier installation, place the PCB macro enabler, and reflow the solder. Note: This won't amplify sound on the Macro. If you want an Amp, check out the Helder Game Tech Macro Amp.
This product is for gamers who want to transform their old Nintendo DS Lite into a Game Boy Macro. With this thin PCB, you can use the DS Lite with only the lower screen when the top screen is removed. It's easy to install, requiring just seven to nine solder points (depending on speaker setup). The mod is compatible with various speakers. Technical fitting like soldering is required, but the thin PCB comes pre - populated with resistors, making it easier. It has a 330 ohm resistor mod for single - screen operation and can drive a speaker of up to 2W with 1.5W output.
