• Voltage regulator for select Neo Geo AES consoles
• 5 Pin TO-220 LM2576 regulator - 5V 3Amps
• High-quality component from official distributor
If your Neo Geo AES runs on 9V and has power issues, it likely has a failed internal 5V regulator. This part takes 9V from the power pack and regulates it to 5V for the console. Some consoles with external 5V power don't need this. It's perfect for 9 - 10V, 3A external power plug variants. Supports 7 - 40V input, steps down to 5V. Use a good quality power brick. Caution: wrong power supply can damage the system. Requires soldering, low to medium difficulty. Thermal paste may be needed (not included).
This product is designed for Neo Geo AES console owners whose consoles use a 9V power supply and are experiencing power issues. It's a 5 Pin TO-220 LM2576 regulator that provides 5V at 3Amps. It's sourced from an official distributor, ensuring quality. If your console has an internal 5V regulator that's failed, this part can fix it. Some consoles with external 5V power don't need this regulator. It's suitable for consoles with a higher voltage external power plug, usually 9 - 10 volts and 3 amps. The regulator supports input voltages from 7 to 40V and steps down to 5V for the system. It's important to use a known brand, good quality power brick to avoid issues like noise in the video and audio. If you're unsure which power supply your console needs, it's best to open it and check for the LM2576 near a large copper coil. Installing this part requires soldering, with a difficulty level from low to medium. You'll need to be able to use desoldering wick or a desoldering gun to remove the old regulator. Thermal paste is often used with voltage regulators like this, but it's not included.
