Power jack socket for Atari Lynx 2 II replacement | ZedLabz

• Replacement power socket for Atari Lynx 2 • Accepts 3.5mm power connector like the original • Fixes faulty or damaged charging ports This is a third party replacement that differs slightly from the original. Internal desoldering and soldering are required for installation. If your power socket has a damaged center pin or seems faulty, this compatible replacement might solve the power issues. The power socket has 3 pins that need to be soldered, and you'll also need to disassemble and desolder the original. It can be used on an Atari Lynx 2 and also in an Atari Lynx 1, but it's slightly different. We offer an alternative socket for Lynx 1 in our store with a shorter barrel. It's recommended to use hot glue to hold the socket in place and provide strain support as the replacement only has three solder pins at the back. Once installed, you can use the Lynx normally with the 3.5mm connector like before. Console disassembly and internal soldering are needed.

This power jack socket replacement is for Atari Lynx 2 owners whose original socket is faulty or damaged. It's a third party replacement that accepts a 3.5mm power connector like the original. It can also be used in an Atari Lynx 1 with some differences. Installation requires internal desoldering and soldering. Use hot glue to hold it in place. Get your Atari Lynx back to working order easily with this replacement.